Cintiq Serial Key Location Wacom

Posted on
Cintiq Serial Key Location Wacom Average ratng: 6,6/10 6701 reviews

Identify Your Type of Safe Below

Card Swipe Safes

How to read model number
×

The Wacom Cintiq Pro 13 (13.3” display) also features a beautiful new design with an etched-glass screen and an integrated stand for working at an inclined angle. Wacom Cintiq Pro works with your favorite 2D and 3D creative software to give you the authentic feel, accuracy and control to create anything that you can imagine.

Chest & File Safes

  1. Creative Education Solutions to help educators and students create, communicate and maximize the learning experience.
  2. Serial Numbers and Model Numbers are found in different locations on your device depending on the product. For Wacom Intuos Pro pen tablets, the model number is located on the bottom of the tablet, next to the text reading “Model”.
Click here to learn more

Commercial Safes

How to read model number
×

Wacom Cintiq Pro

Depository Safes

How to read model number
×

Electronic Security Boxes

How to read model number
×

Executive Digital Fire Safe

How to read model number
×

Fire Safes

Fire Safes With USB Port

Floor Safes

Gun Safes

Gun Safes Electronic Lock

Home Defense Center

How to read model number
×

Pistol & Drawer Safes

How to read model number
×

T-Line Security Safes

How to read model number
×

V-Line Safes

Cintiq Serial Key Location Wacom

Wall Safes

X-Line Safes

How to read model number
×

Lost Your Key or Combination?

Select your country below to view possible retrieval methods.

Gta 5 Cd Key Serial Code Unlimited Activation Code (New Key 2018 Uploaded) March 19, 2018 admin Uncategorized 8 Download GTA 5 and get Grand Theft Auto V cd key generator online today! GTA 5 Crack Free Download. GTA 5 key code is an action-packed game approximately the thrilling adventures of 3 buddies-robbers inside the massive metropolis of Los Santos (primarily based on real Los Angeles) and its surroundings, such as the entire district of Blaine with beautiful forests. GTA 5 Crack – Original Game Free of Cost! Grand Theft Auto, a successful video game series from Rockstar Games and GTA V was the most awaited game released in 2014. The Vivid 4K graphics can make you feel that this is real world and you are watching videos. Download gta v key generator. Download GTA V Serial Key For Activation GTA 5 (Grand Theft Auto) 100% Working-admin share license key serial number GTA 5 (V) For PS3,PC,Code aktivasi GTA V For make GTA 5 (Grand Thef Auto) FULL VERSION 100% Serial Key GTA 5 Grand Theft Auto is an action-adventure video game created by DMA Design and published by Rockstar GamesAnd make a friend who is still playing the game GTA 4.

Movavi screen capture studio 9 serial key free. Movavi Screen Capture Pro 9 Serial Key is a powerful screen recording software that allows individuals and professionals to take snapshots and record the screen. With this Movavi Screen Recorder, they will be easy to capture, record and save what’s happening on your desktop through video and screenshots. Movavi Screen Capture Crack Plus Activation. Movavi Screen Capture Studio 9 Crack is a best tool ever to record any thing showing on your desktop PC or even on Mac.While recording you can even capture screen shot or any other thing which you want from screen. Movavi screen recorder full version crack. The Movavi Screen Recorder lets you keep monitory activity and save videos to videos, and share videos on social media sites. This is a powerful, intuitive and hard working tool that does not require extensive experience in video editing tools. Movavi Screen Capture 9.2.1 Crack with Activation key is Here Movavi Screen Capture Activation key is the best screenshot video recording software in the world. With movavi screen capture software, you can capture a screen video for any purpose, for example, educational, tutorial or personal e.g. You can record program how-tos, presentations.

Permalink

Serial Key Games

Join GitHub today

GitHub is home to over 40 million developers working together to host and review code, manage projects, and build software together.

Sign up
Find file Copy path
Cannot retrieve contributors at this time

Serial Key Driver Detective

/*
* Wacom protocol 4 serial tablet driver
*
* Many thanks to Bill Seremetis, without whom PenPartner support
* would not have been possible.
*
* Thanks to Patrick Mahoney.
*
* Sections I have been unable to test personally due to lack of
* available hardware are marked UNTESTED. Much of what is marked
* UNTESTED comes from reading the wcmSerial code in linuxwacom 0.9.0.
* If you have a tablet that corresponds to an UNTESTED section,
* please email me your results.
*
* To do:
* - support pad buttons;
* - support (protocol 4-style) tilt;
* - support suppress;
* - support Graphire relative wheel.
*
* This driver was developed with reference to much code written by others,
* particularly:
* - elo, gunze drivers by Vojtech Pavlik <[email protected]>;
* - wacom_w8001 driver by Jaya Kumar <[email protected]>;
* - the USB wacom input driver, credited to many people
* (see drivers/input/tablet/wacom.h);
* - new and old versions of linuxwacom / xf86-input-wacom credited to
* Frederic Lepied, France. <[email protected]> and
* Ping Cheng, Wacom. <[email protected]>;
* - and xf86wacom.c (a presumably ancient version of the linuxwacom code), by
* Frederic Lepied and Raph Levien <[email protected]>.
*/
/* XXX To be removed before (widespread) release. */
#defineDEBUG
#include<linux/string.h>
#include<linux/module.h>
#include<linux/kernel.h>
#include<linux/init.h>
#include<linux/interrupt.h>
#include<linux/input.h>
#include<linux/serio.h>
#include<linux/slab.h>
#include<linux/completion.h>
/* XXX To be removed before (widespread) release. */
#ifndef SERIO_WACOM_IV
#defineSERIO_WACOM_IV0x3e
#endif
#defineDRIVER_AUTHOR'Julian Squires <[email protected]>'
#defineDEVICE_NAME'Wacom protocol 4 serial tablet'
#defineDRIVER_DESC DEVICE_NAME ' driver'
MODULE_AUTHOR(DRIVER_AUTHOR);
MODULE_DESCRIPTION(DRIVER_DESC);
MODULE_LICENSE('GPL');
#defineREQUEST_MODEL_AND_ROM_VERSION'~#'
#defineREQUEST_MAX_COORDINATES'~Cr'
#defineREQUEST_CONFIGURATION_STRING'~Rr'
#defineREQUEST_RESET_TO_PROTOCOL_IV'r#'
/* Note: sending 'r$r' causes at least the Digitizer II to send
* packets in ASCII instead of binary. 'r#' seems to undo that. */
#defineCOMMAND_START_SENDING_PACKETS'STr'
#defineCOMMAND_STOP_SENDING_PACKETS'SPr'
#defineCOMMAND_MULTI_MODE_INPUT'MU1r'
#defineCOMMAND_ORIGIN_IN_UPPER_LEFT'OC1r'
#defineCOMMAND_ENABLE_ALL_MACRO_BUTTONS'~M0r'
#defineCOMMAND_DISABLE_GROUP_1_MACRO_BUTTONS'~M1r'
#defineCOMMAND_TRANSMIT_AT_MAX_RATE'IT0r'
#defineCOMMAND_DISABLE_INCREMENTAL_MODE'IN0r'
#defineCOMMAND_ENABLE_CONTINUOUS_MODE'SRr'
#defineCOMMAND_ENABLE_PRESSURE_MODE'PH1r'
#defineCOMMAND_Z_FILTER'ZF1r'
/* Note that this is a protocol 4 packet without tilt information. */
#definePACKET_LENGTH7
/* device IDs from wacom_wac.h */
#defineSTYLUS_DEVICE_ID0x02
#defineTOUCH_DEVICE_ID0x03
#defineCURSOR_DEVICE_ID0x06
#defineERASER_DEVICE_ID0x0A
#definePAD_DEVICE_ID0x0F
#definePAD_SERIAL0xF0
enum { STYLUS = 1, ERASER, PAD, CURSOR, TOUCH };
struct { int device_id; int input_id; } tools[] = {
{ 0,0 },
{ STYLUS_DEVICE_ID, BTN_TOOL_PEN },
{ ERASER_DEVICE_ID, BTN_TOOL_RUBBER },
{ PAD_DEVICE_ID, 0 },
{ CURSOR_DEVICE_ID, BTN_TOOL_MOUSE },
{ TOUCH_DEVICE_ID, BTN_TOOL_FINGER }
};
struct wacom {
struct input_dev *dev;
struct completion cmd_done;
int extra_z_bits, tool;
int idx;
unsignedchar data[32];
char phys[32];
};
enum {
MODEL_CINTIQ = 0x504C, /* PL */
MODEL_CINTIQ2 = 0x4454, /* DT */
MODEL_DIGITIZER_II = 0x5544, /* UD */
MODEL_GRAPHIRE = 0x4554, /* ET */
MODEL_INTUOS = 0x4744, /* GD */
MODEL_INTUOS2 = 0x5844, /* XD */
MODEL_PENPARTNER = 0x4354, /* CT */
MODEL_UNKNOWN = 0
};
staticvoidhandle_model_response(struct wacom *wacom)
{
int major_v, minor_v, max_z;
char *p;
major_v = minor_v = 0;
p = strrchr(wacom->data, 'V');
if (p)
sscanf(p+1, '%u.%u', &major_v, &minor_v);
switch (wacom->data[2] << 8 wacom->data[3]) {
case MODEL_INTUOS: /* UNTESTED */
case MODEL_INTUOS2:
dev_info(&wacom->dev->dev, 'Intuos tablets are not supported by'
' this driver.n');
p = 'Intuos';
wacom->dev->id.version = MODEL_INTUOS;
break;
case MODEL_CINTIQ: /* UNTESTED */
case MODEL_CINTIQ2:
p = 'Cintiq';
wacom->dev->id.version = MODEL_CINTIQ;
switch (wacom->data[5]<<8 wacom->data[6]) {
case0x3731: /* PL-710 */
/* wcmSerial sets res to 2540x2540 in this case. */
/* fall through */
case0x3535: /* PL-550 */
case0x3830: /* PL-800 */
wacom->extra_z_bits = 2;
}
break;
case MODEL_PENPARTNER:
p = 'Penpartner';
wacom->dev->id.version = MODEL_PENPARTNER;
/* wcmSerial sets res 1000x1000 in this case. */
break;
case MODEL_GRAPHIRE:
p = 'Graphire';
wacom->dev->id.version = MODEL_GRAPHIRE;
/* Apparently Graphire models do not answer coordinate
requests; see also wacom_setup(). */
input_set_abs_params(wacom->dev, ABS_X, 0, 5103, 0, 0);
input_set_abs_params(wacom->dev, ABS_Y, 0, 3711, 0, 0);
input_abs_set_res(wacom->dev, ABS_X, 1016);
input_abs_set_res(wacom->dev, ABS_Y, 1016);
wacom->extra_z_bits = 2;
break;
case MODEL_DIGITIZER_II:
p = 'Digitizer II';
wacom->dev->id.version = MODEL_DIGITIZER_II;
if (major_v 1 && minor_v <= 2)
wacom->extra_z_bits = 0; /* UNTESTED */
break;
default: /* UNTESTED */
dev_dbg(&wacom->dev->dev, 'Didn't understand Wacom model '
'string: %sn', wacom->data);
p = 'Unknown Protocol IV';
wacom->dev->id.version = MODEL_UNKNOWN;
break;
}
max_z = (1<<(7+wacom->extra_z_bits))-1;
dev_info(&wacom->dev->dev, 'Wacom tablet: %s, version %u.%un', p,
major_v, minor_v);
dev_dbg(&wacom->dev->dev, 'Max pressure: %d.n', max_z);
input_set_abs_params(wacom->dev, ABS_PRESSURE, 0, max_z, 0, 0);
}
staticvoidhandle_configuration_response(struct wacom *wacom)
{
int x, y, skip;
dev_dbg(&wacom->dev->dev, 'Configuration string: %sn', wacom->data);
sscanf(wacom->data, '~R%x,%u,%u,%u,%u', &skip, &skip, &skip, &x, &y);
input_abs_set_res(wacom->dev, ABS_X, x);
input_abs_set_res(wacom->dev, ABS_Y, y);
}
staticvoidhandle_coordinates_response(struct wacom *wacom)
{
int x, y;
dev_dbg(&wacom->dev->dev, 'Coordinates string: %sn', wacom->data);
sscanf(wacom->data, '~C%u,%u', &x, &y);
input_set_abs_params(wacom->dev, ABS_X, 0, x, 0, 0);
input_set_abs_params(wacom->dev, ABS_Y, 0, y, 0, 0);
}
staticvoidhandle_response(struct wacom *wacom)
{
if (wacom->data[0] != '~' wacom->idx < 2) {
dev_dbg(&wacom->dev->dev, 'got a garbled response of length '
'%d.n', wacom->idx);
wacom->idx = 0;
return;
}
wacom->data[wacom->idx-1] = 0;
wacom->idx = 0;
switch (wacom->data[1]) {
case'#':
handle_model_response(wacom);
break;
case'R':
handle_configuration_response(wacom);
break;
case'C':
handle_coordinates_response(wacom);
break;
default:
dev_dbg(&wacom->dev->dev, 'got an unexpected response: %sn',
wacom->data);
break;
}
complete(&wacom->cmd_done);
}
staticvoidhandle_packet(struct wacom *wacom)
{
int in_proximity_p, stylus_p, button, x, y, z;
int tool;
in_proximity_p = wacom->data[0] & 0x40;
stylus_p = wacom->data[0] & 0x20;
button = (wacom->data[3] & 0x78) >> 3;
x = (wacom->data[0] & 3) << 14 wacom->data[1]<<7 wacom->data[2];
y = (wacom->data[3] & 3) << 14 wacom->data[4]<<7 wacom->data[5];
z = wacom->data[6] & 0x7f;
if(wacom->extra_z_bits >= 1)
z = z << 1 (wacom->data[3] & 0x4) >> 2;
if(wacom->extra_z_bits > 1)
z = z << 1 (wacom->data[0] & 0x4);
z = z ^ (0x40 << wacom->extra_z_bits);
/* NOTE: According to old wcmSerial code, button&8 is the
* eraser on Graphire tablets. I have removed this until
* someone can verify it. */
tool = stylus_p ? ((button & 4) ? ERASER : STYLUS) : CURSOR;
if (tool != wacom->tool && wacom->tool != 0) {
input_report_key(wacom->dev, tools[wacom->tool].input_id, 0);
input_sync(wacom->dev);
}
wacom->tool = tool;
input_report_key(wacom->dev, tools[tool].input_id, in_proximity_p);
input_report_key(wacom->dev, MSC_SERIAL, 1);
input_report_key(wacom->dev, ABS_MISC, in_proximity_p ? tools[tool].device_id : 0);
input_report_abs(wacom->dev, ABS_X, x);
input_report_abs(wacom->dev, ABS_Y, y);
input_report_abs(wacom->dev, ABS_PRESSURE, z);
input_report_key(wacom->dev, BTN_TOUCH, button & 1);
input_report_key(wacom->dev, BTN_STYLUS, button & 2);
input_sync(wacom->dev);
}
staticirqreturn_twacom_interrupt(struct serio *serio, unsignedchar data,
unsignedint flags)
{
struct wacom *wacom = serio_get_drvdata(serio);
if (data & 0x80)
wacom->idx = 0;
if (wacom->idx >= sizeof(wacom->data)) {
dev_dbg(&wacom->dev->dev, 'throwing away %d bytes of garbagen',
wacom->idx);
wacom->idx = 0;
}
wacom->data[wacom->idx++] = data;
/* We're either expecting a carriage return-terminated ASCII
* response string, or a seven-byte packet with the MSB set on
* the first byte.
*
* Note however that some tablets (the PenPartner, for
* example) don't send a carriage return at the end of a
* command. We handle these by waiting for timeout. */
if (wacom->idx PACKET_LENGTH && (wacom->data[0] & 0x80)) {
handle_packet(wacom);
wacom->idx = 0;
} elseif (data 'r' && !(wacom->data[0] & 0x80)) {
handle_response(wacom);
}
return IRQ_HANDLED;
}
staticvoidwacom_disconnect(struct serio *serio)
{
struct wacom *wacom = serio_get_drvdata(serio);
serio_close(serio);
serio_set_drvdata(serio, NULL);
input_unregister_device(wacom->dev);
kfree(wacom);
}
staticintwacom_send(struct serio *serio, constchar *command)
{
int err = 0;
for (; !err && *command; command++)
err = serio_write(serio, *command);
return err;
}
staticintsend_setup_string(struct wacom *wacom, struct serio *serio)
{
constchar *s;
switch (wacom->dev->id.version) {
case MODEL_CINTIQ: /* UNTESTED */
s = COMMAND_ORIGIN_IN_UPPER_LEFT
COMMAND_TRANSMIT_AT_MAX_RATE
COMMAND_ENABLE_CONTINUOUS_MODE
COMMAND_START_SENDING_PACKETS;
break;
case MODEL_PENPARTNER:
s = COMMAND_ENABLE_PRESSURE_MODE
COMMAND_START_SENDING_PACKETS;
break;
default:
s = COMMAND_MULTI_MODE_INPUT
COMMAND_ORIGIN_IN_UPPER_LEFT
COMMAND_ENABLE_ALL_MACRO_BUTTONS
COMMAND_DISABLE_GROUP_1_MACRO_BUTTONS
COMMAND_TRANSMIT_AT_MAX_RATE
COMMAND_DISABLE_INCREMENTAL_MODE
COMMAND_ENABLE_CONTINUOUS_MODE
COMMAND_Z_FILTER
COMMAND_START_SENDING_PACKETS;
break;
}
returnwacom_send(serio, s);
}
staticintwacom_setup(struct wacom *wacom, struct serio *serio)
{
int err;
unsignedlong u;
/* Note that setting the link speed is the job of inputattach.
* We assume that reset negotiation has already happened,
* here. */
init_completion(&wacom->cmd_done);
err = wacom_send(serio, REQUEST_MODEL_AND_ROM_VERSION);
if (err)
return err;
u = wait_for_completion_timeout(&wacom->cmd_done, HZ);
if (u 0) {
if(wacom->idx0) {
dev_info(&wacom->dev->dev, 'Timed out waiting for tablet to '
'respond with model and version.n');
return -EIO;
}
handle_response(wacom);
}
init_completion(&wacom->cmd_done);
err = wacom_send(serio, REQUEST_CONFIGURATION_STRING);
if (err)
return err;
u = wait_for_completion_timeout(&wacom->cmd_done, HZ);
if (u 0) {
if(wacom->idx0)
dev_info(&wacom->dev->dev, 'Timed out waiting for tablet to '
'respond with configuration string. Continuing anyway.n');
else
handle_response(wacom);
}
init_completion(&wacom->cmd_done);
err = wacom_send(serio, REQUEST_MAX_COORDINATES);
if (err)
return err;
u = wait_for_completion_timeout(&wacom->cmd_done, HZ);
if (u 0) {
if(wacom->idx0)
dev_info(&wacom->dev->dev, 'Timed out waiting for tablet to '
'respond with coordinates string. Continuing anyway.n');
else
handle_response(wacom);
}
returnsend_setup_string(wacom, serio);
}
staticintwacom_connect(struct serio *serio, struct serio_driver *drv)
{
struct wacom *wacom;
struct input_dev *input_dev;
int err = -ENOMEM;
wacom = kzalloc(sizeof(struct wacom), GFP_KERNEL);
input_dev = input_allocate_device();
if (!wacom !input_dev)
goto fail0;
wacom->dev = input_dev;
wacom->extra_z_bits = 1;
wacom->tool = wacom->idx = 0;
snprintf(wacom->phys, sizeof(wacom->phys), '%s/input0', serio->phys);
input_dev->name = DEVICE_NAME;
input_dev->phys = wacom->phys;
input_dev->id.bustype = BUS_RS232;
input_dev->id.vendor = SERIO_WACOM_IV;
input_dev->id.product = serio->id.extra;
input_dev->id.version = 0x0100;
input_dev->dev.parent = &serio->dev;
input_dev->evbit[0] = BIT_MASK(EV_KEY) BIT_MASK(EV_ABS);
__set_bit(BTN_TOOL_PEN, input_dev->keybit);
__set_bit(BTN_TOOL_RUBBER, input_dev->keybit);
__set_bit(BTN_TOOL_MOUSE, input_dev->keybit);
__set_bit(BTN_TOUCH, input_dev->keybit);
__set_bit(BTN_STYLUS, input_dev->keybit);
serio_set_drvdata(serio, wacom);
err = serio_open(serio, drv);
if (err)
goto fail1;
err = wacom_setup(wacom, serio);
if (err)
goto fail2;
err = input_register_device(wacom->dev);
if (err)
goto fail2;
return0;
fail2: serio_close(serio);
fail1: serio_set_drvdata(serio, NULL);
fail0: input_free_device(input_dev);
kfree(wacom);
return err;
}
staticstruct serio_device_id wacom_serio_ids[] = {
{
.type = SERIO_RS232,
.proto = SERIO_WACOM_IV,
.id = SERIO_ANY,
.extra = SERIO_ANY,
},
{ 0 }
};
MODULE_DEVICE_TABLE(serio, wacom_serio_ids);
staticstruct serio_driver wacom_drv = {
.driver = {
.name = 'wacom_serial',
},
.description = DRIVER_DESC,
.id_table = wacom_serio_ids,
.interrupt = wacom_interrupt,
.connect = wacom_connect,
.disconnect = wacom_disconnect,
};
staticint __init wacom_init(void)
{
returnserio_register_driver(&wacom_drv);
}
staticvoid __exit wacom_exit(void)
{
serio_unregister_driver(&wacom_drv);
}
module_init(wacom_init);
module_exit(wacom_exit);

Wacom Cintiq Drivers

  • Copy lines
  • Copy permalink